Spectrophotometer Sample and Cell Holders
Perkin Elmer US LLC Thallium (Tl) System 2 Electrodeless Discharge Lamp
System 2 Electrodeless Discharge Lamp for the detection of elemental Thallium (Tl). Note: PinAAcle™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are typically much brighter and, in some cases, provide better sensitivity than comparable HCLs. EDLs are preferred for certain volatile elements. They offer better precision and lower detection limits for analyses that are “noisy” due to weak hollow cathode emission. E Electrodeless Discharge Lamps (EDLs) are designed to be physically interchangeable with Intensitron Hollow Cathode Lamps. Their power supplies are built into all the PinAAcle™ series of atomic absorption spectrometers. Use of EDLs with those instruments requires only the purchase of an EDL driver assembly for each of the lamp positions to be used.
Perkin Elmer US LLC 50 mL Graduated Conical Bottom Tubes with Red Flat Caps Attached, Qty. 500 - Freestanding
Type: Standard, Freestanding Cap Type: Attached Red Flat Caps Size: 28 mm x 115 mm Quantity: 500 (25/Bag)
Perkin Elmer US LLC 3-Slot Demountable Quartz Torch for Optima 4300/5300/7300 V
This demountable 3-slot torch design uses one-piece quartz tubing for plasma and auxiliary gas flow and is recommended for use in organic analysis. It is included in the Quick-Change Torch Module for HF Analysis (N0770911), the Organics Sample Introduction Kit (N0770732), and the Quick-Change Torch Module for Oil Analysis (N0770910) for Optima 4300V/5300V/7300V.
Perkin Elmer US LLC GemCone Low-Flow Nebulizer for Optima 2x00/4x00/5x00/7x00/8x00 and Avio 200/500
The nebulizer is optimized for low nebulizer gas flow for use with cyclonic spray chambers. It requires an end cap (N0680504) for use with Ryton™ Scott spray chambers. This GemCone Nebulizer is included in the Organics Sample Introduction System for Avio 200 (N0790611), Organics Sample Introduction System for Avio 500 (N0810609), Quick-Change Torch Module for Oil Analysis for Optima 4300V/5300V/7300V (N0770910), Organics Kit for Avio 200/500 (N0790610), Organics Kit for Optima 8x00 (N0780608), Organics Kit for Optima 2x00/4x00/5x00/7x00 DV (N0770420), and the Organics Kit for Optima 4300 V/5300 V/7300 V (N0770732).
Perkin Elmer US LLC Radial Purge Extension Window for Optima 3000/3000 SCR/3x00 RL/4300/5300/7300 V
The Radial View Purge Extension Window Tube is a replaceable quartz tube that slides into the mount between the torch and the optics for the radial view.
Perkin Elmer US LLC 1⁄4 in. (6.4 mm) Internal Screw Thread Adapter with 1.8 mm O.D. Nipple, Type A
Tubing Adapters and Connectors provide a means to connect the component shown to the screw fittings of the PTFE tubing assemblies or to connect the tubing components described. This adapter is included in the Alternate Reductant Kit (B0508594) and the Hydride Accessory Kit for Avio 200/500 (N0810433). Type A in instrument manual diagrams.
Perkin Elmer US LLC 1⁄4 in. (6.4 mm) Internal Screw Thread Adapter with 3.3 mm O.D. Nipple, Type B
Tubing Adapters and Connectors provide a means to connect the component shown to the screw fittings of the PTFE tubing assemblies or to connect the tubing components described. Type B in instrument manual diagrams.
Perkin Elmer US LLC Infrared Window for Microscopic FTIR Analysis - KBr, 2 mm
Infrared windows allow for support of microsamples for infrared analysis with mIcroscopes, such as PerkinElmer's Spotlight Systems. These windows are available in the following infrared crystals: BaF2, KBr, NaCl, and ZnSe.
Perkin Elmer US LLC 1⁄4 in. (6.4 mm) Internal Screw Thread Adapter with 0.7 mm O.D. Pt/lr Capillary Nipple, Type F
Tubing Adapters and Connectors provide a means to connect the component shown to the screw fittings of the PTFE tubing assemblies or to connect the tubing components described. Type F in instrument manual diagrams.
Perkin Elmer US LLC UV Wavecal Solution, 500 mL
From instrument installation to instrument calibration, we provide quality set-up, check and calibration standards to ensure instrument performance.
